This website uses cookies. By continuing to use this website you agree to our use of cookies. For more information visit our Cookies Policy
  • World IconEnglish
  • Accessories

    (1 To 26 Of 26)

    SCL

    Image of SCL
    Dust protection cover for most speakON and powerCON chassis connectors to use when no cable connector is mated. Easy to use, it does not block the connectors in the panel below when not in use.

    SCL

    Image of SCL
    Dust protection cover for most speakON and powerCON chassis connectors to use when no cable connector is mated. Easy to use, it does not block the connectors in the panel below when not in use.
    Part No.Description
    SCLDust protection cover

    SCM

    Image of SCM
    Dust protection cover for male chassis connectors to use when no cable connector is mated. Easy to use, it does not block the connectors in the panel below when not in use.

    SCM

    Image of SCM
    Dust protection cover for male chassis connectors to use when no cable connector is mated. Easy to use, it does not block the connectors in the panel below when not in use.
    Part No.Description
    SCMDust protection cover

    SCF

    Image of SCF
    The handy dust protection cover for female chassis connectors can be used, when no cable connector is mated. The cover is easy to use and does not block the connectors in the panel below when not in use.

    SCF

    Image of SCF
    The handy dust protection cover for female chassis connectors can be used, when no cable connector is mated. The cover is easy to use and does not block the connectors in the panel below when not in use.
    Part No.Description
    SCFDust protection cover

    SCDX

    Image of SCDX
    Hinged cover for all D-size chassis connectors

    This hinged cover seals D-size chassis connectors from water, dust and dirt in unmated condition according to IP42. It is available in different colours.

    SCDX - black (if used ...

    SCDX

    Image of SCDX
    Image of SCDX Image of SCDX
    Hinged cover for all D-size chassis connectors

    This hinged cover seals D-size chassis connectors from water, dust and dirt in unmated condition according to IP42. It is available in different colours.

    SCDX - black (if used with opticalCON, black indicates multi-mode)
    SCDX-5 - green (if used with opticalCON, green indicates single-mode APC)
    SCDX-6 - blue (if used with opticalCON, blue indicates single-mode PC)
    SCDX-9 - white (e.g. wall outlet)
    Part No.Description
    SCDXHinged cover

    SCDR

    Image of SCDR
    Soft plastic cover for the rear end of several D-size chassis connectors. It is used to protect the gap between connector and cable.
    The protection cover works with all common wires and cables - you simply cut off the cover end to the preferre...

    SCDR

    Image of SCDR
    Image of SCDR Image of SCDR
    Soft plastic cover for the rear end of several D-size chassis connectors. It is used to protect the gap between connector and cable.
    The protection cover works with all common wires and cables - you simply cut off the cover end to the preferred diameter.
    Part No.Description
    SCDRSoft plastic cover

    NDL

    Image of NDL
    The dummyPLUG NDL for most Neutrik speakON and powerCON chassis enables you to simplify cabling.
    Unused inputs can be covered to avoid miss wiring and protect against dust additionally.

    NDL

    Image of NDL
    The dummyPLUG NDL for most Neutrik speakON and powerCON chassis enables you to simplify cabling.
    Unused inputs can be covered to avoid miss wiring and protect against dust additionally.
    Part No.Description
    NDLDummyPLUG NDL

    NDF

    Image of NDF
    The dummyPLUG NDF for Neutrik female XLR receptacles enable you to simplify cabling.
    Unused inputs can be covered to avoid miss wiring and protect against dust additionally.

    NDF

    Image of NDF
    The dummyPLUG NDF for Neutrik female XLR receptacles enable you to simplify cabling.
    Unused inputs can be covered to avoid miss wiring and protect against dust additionally.
    Material: Plastic
    Part No.Description
    NDFDummyPLUG NDF

    NDM

    Image of NDM
    The dummyPLUG NDM for Neutrik male XLR receptacles enable you to simplify cabling.
    Unused inputs can be covered to avoid miss wiring and protect against dust additionally.

    NDM

    Image of NDM
    The dummyPLUG NDM for Neutrik male XLR receptacles enable you to simplify cabling.
    Unused inputs can be covered to avoid miss wiring and protect against dust additionally.
    Part No.Description
    NDMDummyPLUG NDM

    COMFD

    Image of COMFD
    Fixing plate with M3 thread for efficient and easy mounting of all D-sized chassis connectors

    COMFD

    Image of COMFD
    Image of COMFD Image of COMFD
    Fixing plate with M3 thread for efficient and easy mounting of all D-sized chassis connectors
    Part No.Description
    COMFDFixing plate for D-sized chassis connectors NEW!

    COMFG

    Image of COMFG
    Fixing plate with M3 thread for efficient and easy mounting of all G-sized chassis connectors

    COMFG

    Image of COMFG
    Fixing plate with M3 thread for efficient and easy mounting of all G-sized chassis connectors
    Part No.Description
    COMFGFixing plate for G-sized chassis connectors NEW!

    COMFT NEW!

    Image of COMFT
    Double Neutrik Bracket

    COMFT NEW!

    Image of COMFT
    Image of COMFT Image of COMFT
    Double Neutrik Bracket
    Part No.Description
    COMFTDouble Neutrik Bracket

    SCNLT

    Image of SCNLT
    Gasket for speakON G-size housings for an airtight connection between chassis and frontpanel (also suitable for Amphenol EP cutouts).

    SCNLT

    Image of SCNLT
    Gasket for speakON G-size housings for an airtight connection between chassis and frontpanel (also suitable for Amphenol EP cutouts).
    Part No.Description
    SCNLTGasket for speakON

    BSPx

    Image of BSPx
    Coloured boots for for NPC series Jacks + Neutricon

    BSPx

    Image of BSPx
    Coloured boots for for NPC series Jacks + Neutricon
    Part No.DescriptionColor coding
    BSP0Coloured bootsBlack
    BSP1Coloured bootsBrown
    BSP2Coloured bootsRed
    BSP3Coloured bootsOrange
    BSP4Coloured bootsYellow
    BSP5Coloured bootsGreen
    BSP6Coloured bootsBlue
    BSP7Coloured bootsViolet
    BSP8Coloured bootsGrey
    BSP9Coloured bootsWhite

    BXXx

    Image of BXXx
    Bushings for colour coding.

    BXXx

    Image of BXXx
    Bushings for colour coding.
    Part No.DescriptionColor coding
    BXX0Coloured bushingBlack
    BXX1Coloured bushingBrown
    BXX2Coloured bushingRed
    BXX3Coloured bushingOrange
    BXX4Coloured bootsYellow
    BXX5Coloured bushingGreen
    BXX6Coloured bushingBlue
    BXX7Coloured bushingViolet
    BXX8Coloured bootsGrey
    BXX9Coloured bootsWhite

    XXRx

    Image of XXRx
    Coloured coding rings.

    Insert must not be unsoldered to change the colour coding.

    XXRx

    Image of XXRx
    Coloured coding rings.

    Insert must not be unsoldered to change the colour coding.
    Part No.DescriptionColor coding
    XXR0Coloured ringBlack
    XXR1Coloured ringBrown
    XXR2Coloured ringRed
    XXR3Coloured ringOrange
    XXR4Coloured ringYellow
    XXR5Coloured ringGreen
    XXR6Coloured ringBlue
    XXR7Coloured ringViolet
    XXR8Coloured ringGrey
    XXR9Coloured ringWhite

    DSSx

    Image of DSSx
    Coloured lettering plate for D-shape-connectors

    DSSx

    Image of DSSx
    Coloured lettering plate for D-shape-connectors
    Part No.DescriptionColor coding
    DSS0Coloured plateBlack
    DSS1Coloured plateBrown
    DSS2Coloured plateRed
    DSS3Coloured plateOrange
    DSS4Coloured plateYellow
    DSS5Coloured plateGreen
    DSS6Coloured plateBlue
    DSS7Coloured plateViolet
    DSS8Coloured plateGrey
    DSS9Coloured plateWhite

    Cover Plates

    Image of Cover Plates
    Cover plate to blank off XLR-hole.

    Cover Plates

    Image of Cover Plates
    Cover plate to blank off XLR-hole.
    Material: 1.0mm / 20 gauge Steel
    Part No.DescriptionWeight
    60801-20Cover plate to blank off XLR-hole.9g/0.02lb
    60812-20Cover plate to change XLR-hole to Telejack.8g/0.018lb
    60817-20Cover plate to change XLR-hole to RCA/Phono.9g/0.02lb
    60820-20Cover plate to change XLR-hole to DIN.7g/0.015lb
    60822-20Cover plate to change XLR-hole to BNC.9g/0.02lb

    PXRx

    Image of PXRx
    Coloured rings with flat label surface for PX-Series.

    PXRx

    Image of PXRx
    Coloured rings with flat label surface for PX-Series.
    Part No.Colour
    PXR0Black
    PXR1Brown
    PXR2Red
    PXR3Orange
    PXR4Yellow
    PXR5Green
    PXR6Blue
    PXR7Violet
    PXR8Grey
    PXR9White

    BPXx

    Image of BPXx
    Coloured boots for PX-Series.

    BPXx

    Image of BPXx
    Coloured boots for PX-Series.
    Part No.Colour
    BPX0Black
    BPX1Brown
    BPX2Red
    BPX3Orange
    BPX4Yellow
    BPX5Green
    BPX6Blue
    BPX7Violet
    BPX8Grey
    BPX9White

    XXCR

    Image of XXCR
    Transparent coding ring which allows an individual customized labeling, branding, coding etc.


    Just place an individual coloured and or lettered paper or tape (eg. Brothers) inside the ring.

    XXCR

    Image of XXCR
    Transparent coding ring which allows an individual customized labeling, branding, coding etc.


    Just place an individual coloured and or lettered paper or tape (eg. Brothers) inside the ring.
    Part No.Description
    XXCRTransparent coding ring

    NLFASTON

    Image of NLFASTON
    Faston Receptacle for Speakon Chassis

    Faston receptacle with Positive lock for use with NL4MP, NL4MPR, NL8MPR
    Wire size: 0.8 - 2 mm
    Wiring: flat tabs for 3/16in (FASTON 4.8 x 0.5 mm)

    Bag quantity = 100

    NLFASTON

    Image of NLFASTON
    Faston Receptacle for Speakon Chassis

    Faston receptacle with Positive lock for use with NL4MP, NL4MPR, NL8MPR
    Wire size: 0.8 - 2 mm
    Wiring: flat tabs for 3/16in (FASTON 4.8 x 0.5 mm)

    Bag quantity = 100
    Part No.Description
    NLFASTONFaston Receptacle

    MI8

    Image of MI8
    Male insert for cable and chassis connectors

    The modular system of the miniCON series offers the possibility to assemble a desired connector from a wide range of various parts. Including additional parts for special versions (e.g. cable ...

    MI8

    Image of MI8
    Male insert for cable and chassis connectors

    The modular system of the miniCON series offers the possibility to assemble a desired connector from a wide range of various parts. Including additional parts for special versions (e.g. cable connector extension, crimp set, ...).

    The neutriCON connectors are designed for multipin/industrial applications in harsh and demanding environment. The very robust all metal circular connector offers easy and screwless assembly, flexible part combination and a push-pull locking mechanism.

    Features & Benefits
    -Contact configuration can be selected from 1 to 8 contacts
    -Easy assembly: Contact soldering / crimping in disassembled condition avoids awkward wiring of high density contacts.
    -Precise and robust all metal housing
    -Push-pull self-locking system
    -Coding system possible (polarization)
    Part No.Description
    MI8Male insert miniCON

    M1905 D-Series Blanking Plug

    Image of M1905
    Blanking Plug for XLR/Neutrik D-Series Connector cut-out.

    M1905 D-Series Blanking Plug

    Image of M1905
    Image of M1905 Image of M1905
    Blanking Plug for XLR/Neutrik D-Series Connector cut-out.
    Part No.DescriptionWeight
    M1905Blanking Plug15g/0.033lb

    M1906 D-Series Blanking Plug

    Image of M1906
    Rear Mount Blanking and Converting Plugs for XLR/Neutrik D-Series Connector cut-out.

    M1906 D-Series Blanking Plug

    Image of M1906
    Image of M1906 Image of M1906
    Rear Mount Blanking and Converting Plugs for XLR/Neutrik D-Series Connector cut-out.
    Part No.DescriptionWeight
    M1906Plain10g/0.022lb
    M1906/B9Punched for BNC10g/0.022lb
    M1906/P7Punched for RCA10g/0.022lb
    M1906/T11Punched for Telejack10g/0.022lb
    M1906/D16Punched for DIN (16mm)10g/0.022lb
    M1906/B13Punched for BNC10g/0.022lb

    M1908 D-Series Blanking Plug

    Image of M1908
    Front Mount Blanking and Converting Plugs for XLR/Neutrik D-Series Connector cut-out.

    M1908 D-Series Blanking Plug

    Image of M1908
    Image of M1908 Image of M1908
    Front Mount Blanking and Converting Plugs for XLR/Neutrik D-Series Connector cut-out.
    Part No.DescriptionWeight
    M1908Plain10g/0.022lb
    M1908/B9Punched for BNC10g/0.022lb
    M1908/P7Punched for RCA10g/0.022lb
    M1908/T11Punched for Telejack10g/0.022lb
    M1908/D16Punched for DIN (16mm)10g/0.022lb
    M1908/B13Punched for BNC10g/0.022lb

    Rubber Bungs

    Image of Rubber Bungs
    Rubber bungs for neutriCON chassis connectors and miniCON chassis connectors.

    Rubber Bungs

    Image of Rubber Bungs
    Rubber bungs for neutriCON chassis connectors and miniCON chassis connectors.
    Part No.FinishDescription
    RBR-BUNG-MINICONBlackBung for miniCON
    RBR-BUNG-NEUTRICONBlackBung for neutriCON
    Penn Elcom Logo