Home: N-Case > N-Case Exo

N-Case Exo

(1 To 12 Of 12)

NC-EXO-C3K NEW!

Image of NC-EXO-C3K
Three-legged corner kit for use with NC-EXO-DAE double angle extrusion.
Rigid plastic co...

NC-EXO-C3K NEW!

Image of NC-EXO-C3K
Image of NC-EXO-C3K Image of NC-EXO-C3K
Three-legged corner kit for use with NC-EXO-DAE double angle extrusion.
Rigid plastic corner with over-moulded soft rubber exterior for impact absorption.
Includes Aluminium support bracket and M6 screw.

Not Available in the UK
Material: Plastic/Rubber & Aluminium
Part No.FinishDescription
NC-EXO-C3KBlackThree-legged corner kit NEW!

NC-EXO-LC65K NEW!

Image of NC-EXO-LC65K
Lid Maker corner kit for use with NC-EXO-LE65K Lid maker extrusion.
Rigid plastic co...

NC-EXO-LC65K NEW!

Image of NC-EXO-LC65K
Image of NC-EXO-LC65K Image of NC-EXO-LC65K
Lid Maker corner kit for use with NC-EXO-LE65K Lid maker extrusion.
Rigid plastic corner with over-moulded soft rubber exterior for impact absorption.
Includes Aluminium support brackets and assembly screws.

Not Available in the UK
Material: Plastic/Rubber & Aluminium
Part No.FinishDescription
NC-EXO-LC65KBlackLid Maker corner kit

NC-EXO-GCK NEW!

Image of NC-EXO-GCK
Groove corner kit for use with NC-EXO-GE Groove extrusion, and ...

NC-EXO-GCK NEW!

Image of NC-EXO-GCK
Image of NC-EXO-GCK Image of NC-EXO-GCK
Groove corner kit for use with NC-EXO-GE Groove extrusion, and NC-EXO-DAE Double angle extrusion.
Rigid plastic corner with Aluminium support brackets.

Not Available in the UK
Material: Plastic & Aluminium
Part No.FinishDescription
NC-EXO-GCKBlackGrooved Corner Kit

NC-EXO-TCK NEW!

Image of NC-EXO-TCK
Tongue corner kit for use with NC-EXO-TE Groove extrusion, and ...

NC-EXO-TCK NEW!

Image of NC-EXO-TCK
Image of NC-EXO-TCK Image of NC-EXO-TCK
Tongue corner kit for use with NC-EXO-TE Groove extrusion, and NC-EXO-DAE Double angle extrusion.
Rigid plastic corner with Aluminium support brackets.

Not Available in the UK
Material: Plastic/Rubber & Aluminium
Part No.FinishDescription
NC-EXO-TCKBlackTongue corner kit NEW!

NC-EXO-DAE NEW!

Image of NC-EXO-DAE
7.5mm / 5/16" Double angle extrusion to construct case base and deep lid framework.
Use with NC-...

NC-EXO-DAE NEW!

Image of NC-EXO-DAE
Image of NC-EXO-DAE Image of NC-EXO-DAE
7.5mm / 5/16" Double angle extrusion to construct case base and deep lid framework.
Use with NC-EXO-C3K three-legged corner assembly and NC-EXO-DATK Double Angle Trim.

Not Available in the UK
Material: Aluminium
Part No.FinishDescription
NC-EXO-DAEAluminiumDouble angle extrusion

NC-EXO-LE65 NEW!

Image of NC-EXO-LE65
7.5mm / 5/16" Lidmaker extrusion - 65mm / 2.56" deep external.
With gasket slot for NC-EXO-G5...

NC-EXO-LE65 NEW!

Image of NC-EXO-LE65
Image of NC-EXO-LE65 Image of NC-EXO-LE65
7.5mm / 5/16" Lidmaker extrusion - 65mm / 2.56" deep external.
With gasket slot for NC-EXO-G5 Gasket and built-in striker feature for Overlatches such as L2737 or L2747
Mates with NC-EXO-TE Tongue extrusion.
Use with NC-EXO-LC65K Lid maker corner assembly

Not Available in the UK
Part No.FinishDescription
NC-EXO-LE65KBlackLidmaker extrusion

NC-EXO-TE NEW!

Image of NC-EXO-TE
7.5mm / 5/16" Tongue Extrusion forms location at top of case base.
Mates with NC-EXO-GE...

NC-EXO-TE NEW!

Image of NC-EXO-TE
Image of NC-EXO-TE Image of NC-EXO-TE
7.5mm / 5/16" Tongue Extrusion forms location at top of case base.
Mates with NC-EXO-GE Groove extrusion or NC-EXO-LE65 Lidmaker extrusion.
Use with NC-EXO-TCK Tongue corner assembly.

Not Available in the UK
Part No.FinishDescription
NC-EXO-TEBlackTongue Extrusion

NC-EXO-GE NEW!

Image of NC-EXO-GE
7.5mm / 5/16" Groove Extrusion with gasket slot for NC-EXO-G5 Gasket. Forms location at botto...

NC-EXO-GE NEW!

Image of NC-EXO-GE
Image of NC-EXO-GE Image of NC-EXO-GE
7.5mm / 5/16" Groove Extrusion with gasket slot for NC-EXO-G5 Gasket. Forms location at bottom of a deep lid.
Mates with NC-EXO-TE Tounge extrusion.
Use with NC-EXO-GCK Groove corner assembly.

Not Available in the UK
Part No.FinishDescription
NC-EXO-GEBlackGroove Extrusion

NC-EXO-DATK NEW!

Image of NC-EXO-DATK
Double angle trim Use with NC-EXO-DAE Double angle extrusion or ...

NC-EXO-DATK NEW!

Image of NC-EXO-DATK
Image of NC-EXO-DATK Image of NC-EXO-DATK
Double angle trim Use with NC-EXO-DAE Double angle extrusion or NC-EXO-LE65K Lidmaker extrusion

Not Available in the UK
Material: Plastic
Part No.FinishDescription
NC-EXO-DATKBlackDouble angle trim

NC-EXO-G5 NEW!

Image of NC-EXO-G5
Ø5mm / 3/16" Dust proof Gasket.
For use with NC-EXO-LE65K Lidmaker extrusion & ...

NC-EXO-G5 NEW!

Image of NC-EXO-G5
Ø5mm / 3/16" Dust proof Gasket.
For use with NC-EXO-LE65K Lidmaker extrusion & NC-EXO-GE Groove Extrusion.

Not Available in the UK
Part No.Description
NC-EXO-G5Ø5mm / 3/16" Dust proof Gasket

NC-EXO-W50 NEW!

Image of NC-EXO-W50
50mm / 1.97" N-Case Exo corner castor.

For use with NC-EXO-DAE double angle extrusion.

...

NC-EXO-W50 NEW!

Image of NC-EXO-W50
Image of NC-EXO-W50 Image of NC-EXO-W50
50mm / 1.97" N-Case Exo corner castor.

For use with NC-EXO-DAE double angle extrusion.

Not Available in the UK
Material: Plastic
Part No.FinishDescription
NC-EXO-W50KBlack50mm / 1.97" Corner castor. NEW!

H4114/NC2 NEW!

Image of H4114/NC2
This new 4 stage telescopic pull out handle has been designed to perfectly fit the profile of the N Case Exo components.
Works with ...

H4114/NC2 NEW!

Image of H4114/NC2
Image of H4114/NC2 Image of H4114/NC2
This new 4 stage telescopic pull out handle has been designed to perfectly fit the profile of the N Case Exo components.
Works with NC-EXO-DAE double angle extrusion.
Locks in all 4 stage positions.
Load Capacity: 34Kg / 74.96Lb

Not Available in the UK
Part No.FinishDescription
H4114/NC2Black4 Stage Telescopic Handle NEW!
Penn Elcom Logo